Tutorial edit 3D

Do you want to create some awesome light beams with ONLY Adobe Photoshop? It’s very easy to do with this tutorial. I’ll show you how to create a nice piece of art with any image you like. This is a “get started” tutorial, just for the basics. If you start experimenting, you get a lot of cool effects with this technique. Ok, let’s go!

Step 1: The beginning

Search on the Internet for a nice photo or use one of your own.
I used a photo of Hayden Panettiere (Claire Bennet from Heroes). I suggest to take a high-res image, because it’s much easier to erase the background. That said, open Photoshop and click on file -> open to open your image. To free the object from the background, I used the Polygonal lasso tool and the Eraser tool.

Use whatever suits you.



I suggest you know how to free an image from the background in Photoshop, if not, there are plenty tutorials out there to show you how to do that.



After you did this, go to file -> new and make a new document with the size you like.
I used a 1024 x 768 px with a resolution of 72 p/inch. Now copy and paste the image
(without background) in the new document and position and scale it to make it look right! I scaled it down and positioned it a little to the right. Now fill the background with a nice bright color, I used an orange tint (#ffb61a).



Step 2: Tune the image

The imported image doesn’t seem right and looks fake. That’s because the original picture doesn’t have a lot of orange color. We’re going to change that so it fits better. Duplicate your image by left click on the layer and move it to the “new” icon below it.



Now select the image above the original one and go to filter -> Blur -> Gaussian Blur.
Blur it as much as you don’t see any details anymore. I used 5 pixels.



Go to your layer blending mode and click on “Overlay”. Use an Opacity of about 50%.



Looks much better doesn’t it? Now right click on your original photo and to go
blending options. Click on drop shadow and use these settings:



Step 3: The light beams

Ok now get ready for the great light beams Create a new layer, move it behind the photo and use your Line Tool (U) to draw a line diagonal.



I used 18 px weight with a somewhat lighter color then the background.
Now go to Edit -> Transform -> Warp and start moving the verticies until you get a cool shape out of it.



Repeat this step 3 times. Color all the lines with the color you like.
I used some darker and brighter orange colors. Now you could duplicate those 3 layers and mirror it so it looks like you have 6 different lines.



Step 4: Polar Coordinates

For this step, you have to copy all the layers (so you keep the original ones) and merge the new layers together. Then go to filter -> distort -> polar coordinates.
Use Rectangular to Polar.



Now you have to position and rotate the layer so that it looks like
the beams come from your image.To make the effect looks more 3d, I duplicated
the original straight layers in Photoshop and place it above the image layer so you create a fake depth.



Step 5: Finishing

To make the final image, I created some smoke and warp effects with the brush tool and made some lightning effects. Of course there is a lot you can do to make this a lot better but I hope you get the idea of this tutorial. Click on the image below to view it full size. Thanks for reading and don’t forget to leave a comment so I know all my work wasn’t for nothing. Thanks again!

This tutorial will show you how to use lighting effect to emphasize her face, skin and hair. Before that, some nice tips for retouching will be mentioned





Before we start, let's have a look at what we'll be retouching:

Before:



And after:



Download the original image and we are ready to go!

Step 1:

The original photo is a bit dark and her skin is not bright and lovely enough. In this case, we can use Channel Mixer tool to enhance the colors separately. You can find this tool at the bottom of Layers tab



If you are new to this tool, I wish to explain more about it. As you knew, a photo is based on three main colors (in RGB mode): red, green and blue. With the Channel Mixer tool, you can manipulate these raw channels separately. Notice that when choosing Channel Mixer tool, you will see there are 3 options in the Output Channel drop-down box corresponding to 3 main colors. And you can also notice that with each main color, the slider of that color will always be set to 100%, by default. For example, when you choose Red from Output Channel, you can see the Red slider are at 100% (while Blue and Green are at 0%). And by moving these sliders left or right, you can decrease or increase the amount of that color in the corresponding Output Channel.

With this photo, we should mainly increase the amount of Green with the settings below:







Our photo now looks better



Step 2:

Press Ctrl-Alt-Shift-E to create a flatten image which is the result of the under layers. In this step, we will smooth her skin a bit by going to Filter>Blur>Surface Blur, set the Radius of 2 pixels and Threshold of 4 pixels



Maybe you will not see any big changes but let's have a closer look...

Before:



After blurring:



By using this tool with a small Radius and Threshold, you can make subtle changes without making it look fake

Step 3:

Go to Image>Adjustments>Curves to brighten our photo a bit



We are almost done, the photo now looks much better:



Step 4:

The last thing we need to do is to add lighting focus to emphasize her beautiful face. Press Ctrl-J to duplicate the current layer and go to Filter>Render>Lighting Effects and use these settings:



Then change the Blending mode of this layer to Soft Light to make the colors "softer". Let's have a look at the result again:



Retouching photo is fun! And with the Channel Mixer tool and Lighting Effects filter, we can greatly enhance the photo from its raw color channels and set focus on what we want without destroying the original image.